PDA

View Full Version : Firmware update for Canon EOS 7D



Bibhav Behera
23-07-2010, 02:34 PM
Firmware update for Canon EOS 7D. Please go through this link to know how to install the update. http://web.canon.jp/imaging/eosd/firm-e/eos7d/firmware.html

Sabyasachi Patra
26-07-2010, 09:51 PM
To be specific, these are the changes in the Firmware version 1.2.2 announced by Canon:

Firmware changes

As per Canon, the Firmware Version 1.2.2 incorporates the following fixes.

Fixes a phenomenon in which the set aperture moves when shooting movies in manual exposure mode using some Canon lenses (such as macro lenses).

Fixes the AF point-selection behavior of the C.Fn III-7 (Manual AF pt. selec. pattern) custom function when set to [1].

Fixes the AF point display for the viewfinder electronic level when shooting in the vertical position.

Corrects misspellings in the Spanish and Thai menus for applicable products.


Cheers,
Sabyasachi

Sabyasachi Patra
26-11-2010, 09:07 PM
Canon has updated the firmware of EOS 7D and the latest version 1.2.3 is available for download from their site. This firmware change fixes issues related to flash usage.

Firmware version 1.2.3 incorporates the following fixes.

1. Fixes a phenomenon in which the settings of the Speedlite Transmitter ST-E2 revert to the default settings when both the camera and the ST-E2 are set to auto power off.

2. Fixes a phenomenon in which the Macro Ring Lite (MR-14EX, MT24-EX) and slave flashes do not sync while shooting wirelessly.

The firmware can be downloaded from here: http://web.canon.jp/imaging/eosd/firm-e/eos7d/firmware.html

Tushar Dixit
26-11-2010, 10:21 PM
Hi Sabyasachi:

May sound like a really basic question but can i directly install the latest firmware (is it all inclusive till date) or should I install incrementally?

Regards,
Tushar

Sabyasachi Patra
26-11-2010, 10:25 PM
Tushar,
The latest version is to be installed directly. Even if you have missed a few versions inbetween, it doesnt matter. Just ensure that your battery is fully charged and don't press any buttons when the firmware is being updated.

Cheers,
Sabyasachi

Praveen Siddannavar
27-11-2010, 08:49 PM
Sabyasachi can you pl tell the steps to follow to install & update, i have never done this before

Sabyasachi Patra
27-11-2010, 09:20 PM
Praveen,
It is simple.

First format the card. Then download the software from the link to your computer. Double click on the file to extract it. You can then copy the extracted file to your CF card through the card reader. Remember to copy the file to the root directory of the CF card and not to any subfolder.

Ensure that your battery is fully charged.

Then insert the CF card into the camera. Switch on the camera and press the menu. Scroll to the Firmware version xxx in the menu and then press the SET button (at the back of your camera).

The firmware update screen will appear. You have to Select OK. It will ask you to select the recent version and press OK. The updating now screen will appear.

When the update process goes on, don't press any other button. Once the update is over, it will display the update complete message.

Cheers,
Sabyasachi

Praveen Siddannavar
27-11-2010, 10:47 PM
Thanks Sabyasachi, will try this tomorrow. If i need any help will call you.