w w w . i n d i a w i l d s . c o m
about Sabyasachi Patra
image gallery
contact IndiaWilds

User Tag List

Results 1 to 1 of 1

Thread: Rodelink Wireless Filmmaker KIt

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    New Delhi
    0 Post(s)
    2 Thread(s)

    Default Rodelink Wireless Filmmaker KIt

    Australian microphone maker RODE has announced an interesting wireless system named as RodeLink Wireless Filmmaker Kit.

    This wireless microphone system operates in the Series II 2.4 GHz band and can be used worldwide at this frequency. Unlike Sennheiser and the higher end Lectrosonics, which can only operate on different frequencies in different countries thereby limiting their use, the Rode system can be used worldwide. Hence as a filmmaker you can now carry your wireless microphone system abroad for use.

    The RodeLink Wireless Filmmaker Kit also uses 128 bit encryption which is sent on two channels simultaneously. It provides 24bit/44.1K signal over 100meters. It is also USB as well as AA battery powered.

    Unlike my Sennheiser G3, it has got internal antenna. So another botheration of packing will be over as the antenna of my Sennheiser G3 kit needs more space. The transmitter as well as receiver weigh 190 gms each.

    A broadcast quality lavalier microphone is also included in the kit. The price mentioned in 399 usd. It costs considerably less than my Sennheiser G3 kit. It would be available in mid march.

    This kit will surely be added to my audio equipment the moment it is available.

    Detailed Specifications of the Rodelink Wireless Filmmaker Kit
    Transmission type 2.4GHz Fixed Frequency Agile System
    System dynamic range 112dB
    Range (distance) 100m
    Frequency range 35Hz - 22kHz
    Maximum output level 1v Rms (2.8v P-p)
    Max input signal level 1v Rms (2.8v P-p)
    Max latency 4ms

    Receiver (RX-CAM)
    Power source 2 X AA Battery Or MicroUSB
    Antenna Internal
    Output connection 3.5mm TRS Locking Jack Socket - Dual Mono
    Output impedance 300Ω
    Dimensions 111mm X 65mm X 52mm
    Weight 190gm

    Transmitter (TX-BELT)
    Power source 2 X AA Battery Or MicroUSB
    Antenna Internal
    Output connection 3.5mm TRS Locking Jack Socket
    Output impedance 10kΩ
    Dimensions 111mm X 65mm X 40mm
    Weight 190gm

    Acoustic Principle Pressure Gradient
    Active Electronics JFET impedance converter
    Capsule 0.10"
    Address Type End
    Frequency Range 60Hz - 18kHz
    Output Impedance 3000Ω
    Maximum SPL 110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
    Maximum Output Level 189.0dBu (@ 1kHz, 1% THD into 1KΩ load
    Sensitivity -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) 25dB-A
    Weight 1.00gm
    Dimensions 12.00mmH x 4.50mmW x 4.50mmD
    Warranty 10 year warranty
    Attached Images Attached Images  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts